Error messages
Display message Cause/solution
Base no power
or
No link. Re-connect base
AC adaptor.
RThe handset has lost communication with the base
unit. Move closer to the base unit and try again.
RUnplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
RThe handset’s registration may have been canceled.
Re-register the handset (page 42).
Busy RNo cellular phone is registered to the base unit.
Register a cellular phone (page 18).
RThe called unit is in use.
ROther units are in use and the system is busy. Try
again later.
RThe handset you are using is too far from the base
unit. Move closer and try again.
Call phone company for
your access #
RYou have not stored the voice mail access number.
Store the number (page 55).
Check tel line RThe supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 11).
RIf you do not connect the telephone line cord and use
only cellular lines, set the cellular line only mode
(page 20).
Error!! RRecording was too short. Try again.
RSomeone is using a cellular line or headset. Try
again later.
RThe phonebook copy is incomplete (page 46). The
cellular phone is disconnected from the base unit.
Make sure that other Bluetooth devices are not
connected to the cellular phone, and try again.
Failed RAlthough the unit tried to connect to the cellular
phone or headset, the connection has been failed.
Someone is using a cellular line or headset. Try
again later.
Make sure that the cellular phone or headset is
not connected to other Bluetooth devices.
Invalid RThere is no handset registered to the base unit
matching the handset number you entered.
RThe handset is not registered to the base unit.
Register the handset (page 42).
Requires subscription to
Caller ID.
RYou must subscribe to a Caller ID service. Once you
receive caller information after subscribing to a Caller
ID service, this message will not be displayed.
For assistance, please visit http://www.panasonic.com/help 61
Useful Information