Answering system

Problem Cause/solution
The unit does not record new
messages.
RThe answering system is turned off. Turn it on (page 49).
RThe answering system does not answer or record calls
from cellular lines.
RThe message memory is full. Erase unnecessary
messages (page 50).
RThe recording time is set to Greeting only. Change
the setting (page 53).
RIf you subscribe to a voice mail service, messages are
recorded by your service provider/telephone company,
not your telephone. Change the unit’s number of rings
setting or contact your service provider/telephone
company (page 53).
RThe answering system will not answer incoming calls
while:
the base unit or 2 or more handsets are on a cellular
call or an intercom call.
a headset is in use.
Caller information is recorded in the caller list.
I cannot operate the answering
system remotely.
RThe remote access code is not set. Set the remote
access code (page 51).
RYou are entering the wrong remote access code. If you
have forgotten your remote access code, enter the
remote access code setting to check your current code
(page 51).
RThe answering system is turned off. Turn it on (page 52).
RYou cannot operate the answering system when calling a
cellular phone registered to the base unit.

Bluetooth PIN

Problem Cause/solution
I cannot remember the PIN. RChange the PIN using the following method.
1MMENUN#619
2*7000
3Enter the new 4-digit PIN. a MOKN
4Enter the new 4-digit PIN again. a MSAVEN a MOFFN
68 For assistance, please visit http://www.panasonic.com/help
Useful Information