Programmable Settings
24
Make sure that the handset is on the cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET indicator light is off.
1Press [FUNCTION/EDIT].
2Scroll to Ringer setting by
pressing [] or [].
3Press [].
4Scroll to Ringer pattern by
pressing [] or [].
5Press [].
The current settings are displayed.
6Select the desired ringer tone (1 to 8) by
pressing [] or [] for each line.
For Intercom you can select the ringer
tone (1 to 8), Voice, Auto Ans.
(Auto Answer) or RoomMntr (Room
Monitor).
To move to another line, press [] or [].
Each time you press [] or [], the ringer
tone will change and ring. If the ringer
volume has been set to OFF for the line,
the unit will not ring (p. 22).
7Press [ENTER] (Save key).
A beep sounds.
To exit the programming mode, press
[EXIT].
You can exit the programming mode any time by pressing [EXIT].
–––––––––––––––
Save M1,M2,M3
Save directory
LCD contrast
Ringer setting
Change password
–––––––––––––––
Ringer volume
Ringer pattern
Ringer volume
Ringer pattern
Incoming call
Ringer pattern
L1 L2 Intercom
1 2 3
Ringer pattern
L1 L2 Intercom
1 2 Auto Ans.