44

Storing Names and Numbers

You can store up to 3 names and phone numbers in the one-touch auto dial
buttons.
Make sure that the handset is on the cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET indicator light is off.
1Press [FUNCTION/EDIT].
2Press [] at Save M1,M2,M3.
3Enter a name, up to 15 characters with
the dialing buttons ([0] to [9]) (p. 39).
To move the cursor, press [] or [].
If a name is not required, press []
(Next key) and go to step 5.
4Press [] (Next key).
5Enter a phone number up to 22 digits.
Each time you press [CLEAR], a digit is
erased. To erase all of the digits, press
and hold [CLEAR].
6Press [] (Next key).
If you want to change the name or
number, press [] to reach the desired
display and change it.
7Press one of the one-touch auto dial
buttons ([M1], [M2] or [M3]).
A beep sounds.
To continue storing an item to another one-
touch auto dial button, repeat from step 2.
To exit the programming mode, press
[EXIT].
Do not press any one-touch auto dial buttons before storing to prevent
misoperation.
–––––––––––––––
Save M1,M2,M3
Save directory
Enter name =Next
Enter name
John White =Next
Enter phone no.
2345678901 =Next
John White
234-567-8901
M1,M2,M3=Save
John White
234-567-8901

One- Touch Dialer