45
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
When using the Dial Lock (p. 57) or Call Restriction feature (p. 58), you cannot
store an item in a one-touch auto dial button ([M1] to [M3]). 3 beeps will be heard
in step 2.
You can exit the programming mode any time by pressing [EXIT].
If a pause is required for dialing, press [PAUSE] where needed. If required, you
can also insert [FLASH] in a phone number. Pressing [PAUSE] or [FLASH]
counts as one digit (p. 52, 53).
To erase a stored number
1Press the one-touch auto dial button
([M1], [M2] or [M3]) you want to erase.
The stored item is displayed with the
button number (#1 to #3).
2Press [CLEAR].
To stop erasing, press [] (No key).
3Press [ENTER] (Yes key) or [CLEAR].
A beep sounds, Clear is displayed and
the information is erased.
Empty is displayed.

Dialing a Stored Number

1Lift the handset or press [SP-PHONE/HEADSET] or a line button.
2Press the desired one-touch auto dial button ([M1], [M2] or [M3]).
The stored number is displayed and dialed.

OR

1Press the desired one-touch auto dial button ([M1], [M2] or [M3]).
The stored number is displayed.
2Lift the handset or press [SP-PHONE/HEADSET] or a line button.
You can dial numbers stored in the one-touch auto dial buttons ([M1], [M2] and
[M3]) even if the Dial Lock (p. 57) or Call Restriction feature (p. 58) is on.
John White
234-567-8901 #1
Clear?
=No ENTER=Yes