65
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
You cannot store a
name and phone
number in memory.
Programming is not possible when the
handset is off the cradle or the SP-PHONE/
HEADSET indicator lights.
Do not pause for over 60 seconds while storing
.
Do not enter a phone number more than
22 digits long.
When using the Dial Lock (p. 57) or Call
Restriction feature (p. 58), you cannot store a
phone number in the one-touch auto dial
buttons ([M1] to [M3]).
If “Directory full” is displayed, erase
other stored items from the directory (p. 43).
While programming or
searching, the unit
starts to ring and
stops the program/
search.
To answer the call, lift the handset or press
[SP-PHONE/HEADSET]. Start again from
the beginning after hanging up.
The unit does not
display the caller’s
name and/or phone
number.
You need to subscribe to a Caller ID service.
Other telephone equipment may be
interfering with your phone. Disconnect it and
try again.
Other electrical appliances connected to the
same outlet may be interfering with the Caller
ID information.
Telephone line noise may be interfering with
the Caller ID information. Consult your
telephone company.
The caller requested not to send his/her
information. See page 29.
If a call is being transferred to you, the caller
information will not be displayed.
The display exits the
Caller List. Do not pause for over 60 seconds while
searching.
You cannot redial by
pressing [REDIAL].•If the last number dialed was more than
32 digits long, the number will not be redialed
correctly.
Problem Cause and Remedy