8
When the handset is on the cradle, the AC
adaptor is connected and the SP-PHONE/
HEADSET indicator light is off, the display
shows the current time and date, the extension
number, and the number of new calls if you
subscribed to a Caller ID service (p. 29).
If “” flashes on the display, the clock needs
adjusting (p. 15, 16).
During a conversation, the display shows the
length of the call (ex. 1 hour, 6 minutes and
35 seconds).
This is a display from the Caller List. The
display shows:
—the caller’s name,
—the called line,
—the caller’s number,
—the time and date of the last call
(ex. Jan. 10, 11:20 AM), and
—the number of times called (ex. 3 times).
: The dial lock mode is set (p. 57).
:[MUTE] was pressed during a conversation (p. 52).
: Displays when storing or viewing the directory items (p. 38, 40).
: Displays while viewing the redial list (p. 26).
: The battery power is low or the batteries have not been installed.
To replace or install the batteries, see page 9.
:[PAUSE] was pressed while dialing or storing phone numbers.
:[FLASH] was pressed while storing phone numbers.
1234567890123456
ABCDEFGHIJKLMNOP
abcdefghijklmnop
(This display shows all of the possible
configurations.)
12:34AM 5/21[1]
10 new calls
12:00 1.1 [1]
12:34AM 5/21[1]