38
You can store up to 50 names and phone numbers in the directory. All
directory items are sorted by the first word in alphabetical order. Using the
directory, you can make a call by selecting a name on the display.
Make sure that the handset is on the cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET indicator light is off.
Storing Names and Numbers
1Press [FUNCTION/EDIT].
Scroll to “Save directory” by
pressing [] or [].
2Press [].
• The display shows the number of stored
items then “Enter name”.
3Enter a name, up to 15 characters with
the dialing buttons ([0] to [9]) (p. 39).
• To move the cursor, press [] or [].
• If a name is not required, press []
(Next key) and go to step 5.
4Press [] (Next key).
5Enter a phone number up to 22 digits.
• Each time you press [CLEAR], a digit is
erased. To erase all of the digits, press
and hold [CLEAR].
6Press [] (Next key).
• If you want to change the name or
number, press [] to reach the desired
display and change it.
7Press [ENTER] (Save key).
• A beep sounds.
• To continue storing other items, repeat from step 2. To exit the
programming mode, press [EXIT].
• You can exit the programming mode any time by pressing [EXIT].
• If a pause is required for dialing, press [PAUSE] where needed. If required, you
can also insert [FLASH] in a phone number. Pressing [PAUSE] or [FLASH]
counts as one digit (p. 52, 53).
• If the display shows “Directory full” in step 2, press [EXIT]. To erase other
stored items from the directory, see page 43.
Save M1,M2,M3
Save directory
LCD contrast
▼
Directory=
10 items
Enter name =Next
▼
▼
▼
Enter name
Tom Jones =Next
▼
▼
▼
▼
Enter phone no.
0987654321 =Next
▼
▼