Replacing Belt
Motor Shaft Arbre du moteur Eje del transmissión del motor
Agitator Assembly Assemblage de l’agitateur
Agitator Support Montaje del agitador Support de l’agitateur
Soporte del agitador
Cover Base
Couvercle Base
Cubierta Base
Tab
Languette
Ranura
➢Install new belt in belt groove on the agitator assembly, then over the motor shaft.
➢Be sure belt is under belt guard.
➢Insert both support tabs into the base slots.
➢Snap agitator supports into place.
➢Line up front of cover and base.
➢Rest cover on front edge of base as shown.
➢Tilt cover to back.
➢Press cover firmly until tabs snap into place.
➢Replace cover screws, light bulb and light cover.
- 40 -
