Panasonic MC-V9644 operating instructions Removing Belt

Removing Belt

Tab

Languette

Pestaña

Base

Agitator Support

Support de l’agitateur

Soportes del agitador

➢Disconnect cleaner from electrical outlet.

➢Frequently check and remove hair, string and lint build-up in the POWER NOZZLE brush and brush support areas.

➢If build-up becomes excessive, disconnect POWER NOZZLE from wand and follow the steps below.

➢Remove light cover and light bulb as shown under “REPLACING HEADLIGHT BULB”.

➢Unscrew the two (2) POWER NOZZLE cover screws .

➢Turn POWER NOZZLE over.

➢To remove cover, insert screwdriver at cover tabs on both sides and twist to release tabs.

➢Turn POWER NOZZLE right side up.

➢Press handle release pedal and lower the swivel.

➢Tilt cover forward from back until front snaps free.

➢Carefully insert and twist screwdriver at each brush support to free brush from base.

➢Remove worn belt.

➢See AGITATOR ASSEMBLY for picture of complete brush assembly.

- 38 -