Panasonic NN-H264 Timer Feature, To Use as a Kitchen Timer, To Set Stand Time, To Set Delay Start

Models: NN-H264

1 72
Download 72 pages 28.86 Kb
Page 23
Image 23
Timer Feature

Timer Feature

This feature allows you to program the oven as a kitchen timer. It can also be used to program a standing time after cooking is completed and/or to program a delay start.

To Use as a Kitchen Timer:

Example: To count down 5 minutes.

1.

 

 

 

 

 

 

 

• Press Timer.

 

 

 

 

 

 

 

 

 

2.

 

 

 

 

 

 

 

• Set desired amount of time using

 

 

 

 

 

 

 

 

number pads.

 

 

 

 

 

 

 

 

(up to 99 minutes and 99 seconds).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.

 

 

 

 

 

 

 

• Press Start.

Time will count down without oven

operating.

To Set Stand Time:

Example: To cook at P6 power for 3 minutes, with stand time of 5 minutes.

1.

 

 

 

 

 

 

 

• Enter the desired Power Level (see

 

 

 

 

 

 

 

 

page 12 for directions).

 

Press 5 times

 

 

 

 

 

 

 

 

 

2.

 

 

 

 

 

 

 

Set desired cooking time using number

 

 

 

 

 

 

 

 

pads.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.

 

 

 

 

 

 

 

• Press Timer.

 

 

 

 

 

 

 

 

 

4.

 

 

 

 

 

 

 

• Set desired amount of Stand Time

 

 

 

 

 

 

 

 

using number pads. (up to 99 minutes

 

 

 

 

 

 

 

 

 

 

 

 

 

and 99 seconds)

 

 

 

 

 

 

 

 

 

5.

 

 

 

 

 

 

 

• Press Start.

Cooking will start. After cooking,

stand time will count down without oven operating.

CAUTION:

If oven lamp is lit while using the timer feature, the oven is incorrectly programmed. Stop oven immediately and re-read instructions.

To Set Delay Start:

Example: To delay the start of cooking for 5 minutes, and cook at P6 power for 3 minutes.

1.

 

 

 

 

 

• Press Timer.

 

 

 

 

 

 

 

2.

 

 

 

 

 

• Enter desired amount of delay time

 

 

 

 

 

 

using number pads. (up to 99 minutes

 

 

 

 

 

 

 

 

 

 

 

and 99 seconds)

 

 

 

 

 

 

 

3.

 

 

 

 

 

• Enter the desired Power Level (see

 

 

 

 

 

 

page 12 for directions).

 

Press 5 times

 

 

 

 

 

 

 

4.

 

 

 

 

 

Set desired cooking time using number

 

 

 

 

 

 

pads.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.

 

 

 

 

 

• Press Start.

Delay time will count down. Then

cooking will start.

NOTE:

1.When each stage finishes, a two-beep signal sounds. At the end of the program, the oven will beep five times.

2.If the oven door is opened during Stand Time, Kitchen Timer or Delay Time, the time on the display will continue to count down.

3.Stand time and Delay start cannot be programmed before any automatic Function. This is to prevent the starting tem- perature of food from rising before defrosting or cooking begins. A change in starting temperature could cause inac- curate results.

21

Page 23
Image 23
Panasonic NN-H264 Timer Feature, To Use as a Kitchen Timer, To Set Stand Time, To Set Delay Start