Panasonic NN-H264 Cleaning Vent Grille Oven Air Vent, Installing Vent Grille

Care and Cleaning of Your Microwave Oven (continued)

Cleaning Vent Grille (Oven Air Vent)

1.Moisten a soft cloth in hot water containing mild detergent and wipe gently as shown in Fig. A.

Do not use ammonia or a strong detergent.

(Fig. A)

Charcoal Filter Attachment/Replacement (Optional)

If your oven is vented inside the kitchen, the optional charcoal filter should be attached and replaced every 6 to 12 months, or more often if necessary. The charcoal filter cannot be cleaned. To order a charcoal filter, contact your local Panasonic dealer.

1.Remove the Vent Grille

Remove three screws from the top of Grille as shown in Fig. B.

To remove Vent Grille, open the door, pull at the bottom of the grille, and tilt upwards.

Screws

1

1

(Fig. B)

2.Install Charcoal Filter

Align Charcoal Filter with two holes, then secure it with two screws as shown in Fig. C.

Screw Screw

(Fig. C)

Note: To prepare filter bracket for extension, as shown by the dotted lines, follow the installation instructions packed with the filter.

Installing Vent Grille

1.Align the tabs of Grille with the slots of top plate, and insert as shown in Fig. D.

Top Plate

Slot

Grille

(Fig. D)

2.Install the bottom of Grille so that the locking tabs hook into the slots of the steel plate as shown in Fig. E and F.

2

2

(Fig. E)

Top Plate

Grille

Tab

Slot

(Fig. F)

3. Replace three screws on the top of Grille as shown in Fig. B.

28