Panasonic NN-H264 Before Requesting Service, These things are normal, Problem, Possible Cause

Models: NN-H264

1 72
Download 72 pages 28.86 Kb
Page 32
Image 32
Before Requesting Service

Before Requesting Service

These things are normal:

The oven causes interference

Some radio and TV interference might occur when you cook with the microwave oven.

with my TV.

This interference is similar to the interference caused by small appliances such as

 

mixers, vacuums, blow dryers, etc. It does not indicate a problem with your oven.

 

 

Steam accumulates on the oven

During cooking, steam and warm air are given off from the food. Most of the steam and

door and warm air comes from

warm air are removed from the oven by the air which circulates in the oven cavity.

the oven vents.

However, some steam will condense on cooler surfaces such as the oven door. This is

 

normal. After use, the oven should be wiped dry (see page 27).

PROBLEM

Oven will not turn on.

Oven will not start cooking.

The Glass Tray wobbles.

When the oven is operating, there is noise coming from the glass tray.

The word “Child” appears in the Display Window.

The word "DEMO MODE" appears on the Display Window.

POSSIBLE CAUSE

The oven is not plugged in securely.

Circuit breaker or fuse is tripped or blown.

There is a problem with the outlet.

The door is not closed completely.

Start Pad was not pressed after programming.

Another program is already entered into the oven.

The program is not correct.

Stop/Reset Pad has been pressed accidentally.

The Glass Tray is not positioned properly on the Roller Ring or there is food under the Roller Ring.

The Roller Ring and oven bottom are dirty.

The CHILD LOCK was activated by pressing Function pad and selecting "CHILD LOCK ON".

Function Pad was pressed and selected "DEMO MODE ON".

REMEDY

Remove plug from outlet, wait 10 seconds and re-insert.

Reset circuit breaker or replace fuse.

Plug another appliance into the outlet to check if it is working.

Close the oven door securely.

Press Start Pad.

Press Stop/Reset Pad to cancel the previous program and enter new program.

Program again according to the Operating Instructions.

Program oven again.

Take out Glass Tray and Roller Ring. Wipe with a damp cloth and reset Roller Ring and Glass Tray properly.

Clean these parts according to Care and

Cleaning of your Microwave Oven (see page 27).

Deactivate LOCK by pressing Function pad, touching number 5 and selecting "CHILD LOCK OFF". (see page 10)

Deactivate mode by pressing function pad, touching number and selecting "DEMO OFF". (see page 10)

30

Page 32
Image 32
Panasonic NN-H264 Before Requesting Service, These things are normal, Problem, Possible Cause, Remedy