
VCR display: For automatic change of the brightness of the VCR display when the VCR is switched off.
•Set the brightness of the VCR display as follows:
[ON]: | Indications are brightly lit. |
[OFF]: | Indications are not lit. |
[DIMMED]: | Indications are dimly lit. |
|
|
AV2: | To select the type of external source |
| equipment which is connected to the VCR’s |
| AV2 |
•Set the external source equipment as follows:
[DECODER]: | When a decoder is connected. |
[EXT LINK 1]: | When a digital receiver which transmits a special |
| control signal recordings via the |
| cable, for example the F.U.N. receiver |
| |
| recordings. (See page 13.) |
[EXT LINK 2]: | When an external equipment with a timer function |
| is connected for the linked timer recordings. |
| (See page 13.) |
[EXT]: | When another VCR or a satellite receiver is |
| connected. |
|
|
| To make an |
| cassette. (See page 11.) |
•Set the
[ON]: | To record in |
[OFF]: | To record in VHS format on |
|
|
To record a VHS cassette with | |
| Quality. This format is only possible in the |
| SP mode. (See page 11.) |
•Set the
Audio playback: To set the Audio mode to be used during playback. (For
•Set Audio mode as follows:
[NORMAL]: | Normally set to this position. |
[MIX]: | Use this setting when playing back a cassette |
| tape on which audio dubbing has been |
| performed. The |
| sound and the normal sound track (mono) with |
| the |
| together. |
|
|
Remote: | To set the Remote control mode. |
| (For |
•Set the Remote control mode as follows:
[VCR 1]: Select this setting on both the VCR and the remote control for normal use with one VCR.
[VCR 2]: Select this setting on both the VCR and the remote control when using this VCR and another Panasonic VCR in the same place. This ensures that you can operate both VCRs independently with their respective remote control. It also allows you to operate both VCRs with a single remote control, simply by changing the remote control mode on the remote control.
•To change the remote control mode on the remote control itself, change the position of the [VCR 1/2] (16) to match the setting. If these settings are not matched, the remote control cannot be used to operate the VCR.
4)Press the [OK] (24) to conclude the setting. (Press it twice on the Remote control setting.)
5)Press the [EXIT] (27) to exit the On Screen Display.
Language or Country Setting
[ON]: | To record in |
[OFF]: | To record in VHS format on VHS cassette. |
|
|
Illumination: | To light the front illumination strip when the |
| VCR is on. (For |
•Set the lighting of the front illumination strip as follows:
[ON]: | The front illumination strip is lit when the VCR is |
| on. |
[OFF]: | The front illumination strip is not lit when the VCR |
| is on. |
|
|
TV system: | To select the type of colour TV system to be |
| used during playback or during recording |
| from an external source. |
•Set the colour TV system as follows:
[AUTO]: | The VCR automatically distinguishes PAL, |
| SECAM/MESECAM system. If the picture lacks |
| colour, set to [PAL] or [MESECAM]. |
1)Press the [MENU] (7) to display the Main menu on the TV screen.
2)Press the [Cursor] (38) 34 to select [Other settings]. Press the [OK] (24) to display Other settings menu.
3)Press the [Cursor] (38) 3421 to select [Language] or [Country] and the entry field for [Language] or [Country] in this order.
4)Press the [Cursor] (38) 34 to select the desired language or country.
Other settings |
| Panasonic VCR | |
2/2 | |||
TV system | : AUTO | ||
Picture | : AUTO | ||
Audio playback | : NORMAL | ||
Remote | : VCR 1 | ||
Language | : | English |
|
Country | : | others |
|
|
|
|
|
NV-HS830 Series
|
| Panasonic VCR | |
Other settings |
|
|
|
Tape length | : AUTO (2 | ||
OSD | : 4:3 |
| |
Power save | : OFF | ||
VCR display | : DIMMED | ||
AV2 | : DECODER | ||
: ON | |||
: OFF | |||
TV system | : AUTO | ||
Language | : | English |
|
Country | : | others |
|
|
|
|
|
[PAL]: | When PAL system is used. |
[MESECAM]: | When SECAM system is used. |
|
|
Picture: | To set the playback picture sharpness |
| (sharper or softer). (For |
•Adjust the picture sharpness as follows:
[AUTO]: | To select sutomatic sharpness adjustment of the |
| playback picture. |
[SHARP]: | To make the playback picture sharper. |
[SOFT]: | To make the playback picture softer. |
|
|
5)Press the [OK] (24) to conclude the setting.
6)Press the [EXIT] (27) to exit the On Screen Display.
21