Storing TV Broadcasts in Your VCR
The VCR is fitted with its own tuner (just like a normal TV) and can be preset to receive up to 99 TV broadcast stations.
Pre-programmed TV Channels (Australia only)
The local TV broadcast channels 2, 7, 9, 10 and 28 are
That is, if you can receive television broadcasts on VHF channels 2, 7, 9, 10 and UHF channel 28, these are already
Auto Tuning Using the On Screen Display For Australia
Introduction
Auto Tuning using the On Screen Display should be performed according to the following method if necessary.
Preparations
•Confirm that the TV is on and the VCR viewing channel is selected.
•Turn on the VCR and select any programme position except A1 or A2.
•Set [VCR/TV] switch (22) to [VCR].
tuned on the programme positions with the matching numbers. However, it is possible to cancel these settings and tune the local TV broadcast channels to any desired programme position.
Auto Tuning Using the On Screen Display For New Zealand
When you use this VCR in New Zealand, need to operate as follows:
Preparations
• Confirm that the TV is on and the VCR viewing channel is |
selected. |
Operations
1Press [MENU] (7) to display the Main menu on the TV screen.
2Press [Cursor] (37) (34) to select [TUNER PRESET] then press [OK] (23).
MENU
CLOCK SET TUNER PRESET SYSTEM OPTION
SELECT :
, OK
END :MENU
MENU
CLOCK SET 
TUNER PRESET SYSTEM OPTION
SELECT :
, OK
END :MENU
• Turn on the VCR and select any programme position except |
3 Confirm that [COUNTRY] is set
TUNER PRESET |
to [AUSTRALIA]. |
A1 or A2.
• Set [VCR/TV] switch (22) to [VCR].
CH 1 | [OFF] |
CLEAR | |
COUNTRY | [AUSTRALIA] |
AUTO TUNE |
|
SEARCH | [3] |
FINE |
|
Operations
1Press [MENU] (7) to display the Main menu on the TV screen.
MENU 
CLOCK SET
TUNER PRESET SYSTEM OPTION
SELECT :
, OK
END :MENU
4 Press [Cursor] (37) (34) to |
select [AUTO TUNE] then press |
[Cursor] (37) (21) to start the |
Auto Tuning. |
• When Auto Tuning is |
completed, the On Screen |
SELECT: |
|
| END :MENU | |
| AUTO TUNING |
| ||
| IN PROGRESS, |
| ||
| PLEASE WAIT. |
| ||
CH 1 |
| SEARCH | 100 | |
2 Press [Cursor] (37) (34) to |
select [TUNER PRESET] then |
press [OK] (23). |
MENU CLOCK SET 
TUNER PRESET SYSTEM OPTION
SELECT :
,OK
END :MENU
Display disappears and |
programme position 1 is |
selected. |
Channels that can be Received
END: MENU |
The number displayed here is the number of channels still to be auto tuned.
3 Press [Cursor] (37) (34) to |
select [COUNTRY] then press |
[Cursor] (37) (21) to select |
[NEW ZEALAND]. |
TUNER PRESET
CH 1 |
| |
CLEAR | [OFF] | |
COUNTRY | [AUSTRALIA] | |
AUTO TUNE |
| |
SEARCH | [3] | |
FINE |
| |
SELECT: |
| END :MENU |
| ||
TUNER PRESET | ||
CH 1 |
| |
CLEAR | [OFF] | |
COUNTRY | [NEW ZEALAND] | |
AUTO TUNE | [3] | |
SEARCH | ||
FINE |
| |
| VHF | UHF | CATV |
|
|
|
|
Australia | |||
|
|
|
|
New Zealand | |||
|
|
|
|
Notes:
• Auto Tuning searches for TV stations from VHF minimum to |
UHF maximum and memorizes every tuned programme |
position. Other programme positions are skipped. |
• Auto Tuning takes five or more minutes to complete its |
4Press [Cursor] (37) (34) to select [AUTO TUNE] then press [Cursor] (37) (21) to start the
Auto Tuning.
•When Auto Tuning is completed, the On Screen Display disappears and programme position 1 is selected.
SELECT: | END :MENU | |||
TUNER PRESET |
| |||
CH 1 |
|
| ||
CLEAR |
| [OFF] | ||
COUNTRY | [NEW ZEALAND] | |||
AUTO TUNE |
|
| ||
SEARCH |
| [3] | ||
FINE |
|
| ||
SELECT: |
|
| END :MENU | |
|
| |||
|
| AUTO TUNING |
| |
|
| IN PROGRESS, |
| |
|
| PLEASE WAIT. |
| |
CH 1 | SEARCH | µ 100 | ||
|
|
| END: MENU | |
The number displayed here is the number of channels still to be auto tuned.
search. |
• If the VCR is not correctly tuned by Auto Tuning, follow the |
procedure on page 8. |
7
