Manual Tuning Procedure
1 | Press [MENU] (7) to display the Main menu on the TV |
| screen. |
2 | Press [Cursor] (37) (34) to select [TUNER PRESET] |
| then press [OK] (23). |
3 | Press [Cursor] (37) (34) to select [CH] then select the |
| channel number you want to tune by pressing [Cursor] |
| (37) (21). |
4 | Confirm that [CLEAR] is set to [OFF]. |
5 | Press [Cursor] (37) (34) to select [SEARCH] then |
Setting the Clock of Your VCR
In the event of a power failure, the clock will operate on its back up system for a minimum of 3 years. After 3 years, clock back up in the event of a power failure can only be guaranteed for maximum of 1 hour.
Preparations
•Confirm that the TV is on and the VCR viewing channel is selected.
•Turn on the VCR.
press [Cursor] (37) (21) to start the Manual Tuning. |
• If the desired TV station has not been tuned, press |
[Cursor] (37) (21) again. |
• Press [MENU] (7) and repeat steps |
programme position you want to tune to a station. |
CH 2 | SEARCH | CH 2 | SEARCH 74 | ||
| END: MENU |
|
|
| END: MENU |
|
|
|
| ||
• Example:
Date; 16 October, 2005
Time; 20:15
Operations
1Press [MENU] (7) to display the Main menu on the TV screen.
MENU
CLOCK SET TUNER PRESET SYSTEM OPTION
SELECT :
, OK
END :MENU
6Press [MENU] (7) three times to exit the On Screen Display.
Direct Tuning
Follow steps 1 to 3 of Manual Tuning Procedure.
4 | Confirm that [CLEAR] is set to [OFF]. |
5 | Press [Cursor] (37) (34) select [SEARCH]. |
6 | Press [Numeric] (2) to enter the number of the desired |
| programme position. |
2Press [Cursor] (37) (34) to select [CLOCK SET] then press [OK] (23).
3Set each item by pressing [Cursor] (37) (341). Press
[Cursor] (37) (2) to return to the previous item.
MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
SELECT :
, OK
END :MENU
| CLOCK SET |
| |
Y | M | D | H:M |
2005 | 1 | 1 | 0:00 |
SELECT: 
START:MENU
• For other channels that require tuning, repeat steps |
7 Press [MENU] (7) twice to exit the On Screen Display. |
Fine Tuning Procedure
Follow steps 1 to 3 of Manual Tuning Procedure.
4Press [Cursor] (37) (34) to select [FINE] then press [Cursor] (37) (21) to obtain the best tuning condition.
• Press [OK] (23) to return the tuning to its former state.
CH 2 |
|
|
| AFC: OK |
FINE |
| : |
| END: MENU |
| ||||
|
|
|
|
|
5 Press [MENU] (7) to exit the On Screen Display.
Blanking of Unused Programme Positions
Follow steps 1 to 3 of Manual Tuning Procedure.
4Press [Cursor] (37) (34) to select [CLEAR] then press [Cursor] (37) (21) to select [ON].
•Repeat steps
•To cancel the blanking of a programme position select that programme position then set [CLEAR] to [OFF].
5Press [MENU] (7) twice to exit the On Screen Display.
At the set time (H:M) point:
•When it is kept pressed, the indication changes in 30 minute steps.
•There is no need to press [Cursor] (37) (1).
4 Press [MENU] (7).
• The clock starts.
Time Reset Function
If the clock is less than two minutes slow or fast, it can easily be reset to the proper time.
Example:
Resetting the clock to 12:00.00
1Press [MENU] (7) to display the Main menu on the TV screen.
2Press [Cursor] (37) (34) to select [CLOCK SET] then press [OK] (23).
3When the current clock displays on the VCR is between 11:58.00 and 12:01.59, press [MENU] (7) as soon as you hear the 12:00.00 signal. This resets the time to 12:00.00.
8
