To Set the Category
The category setting allows you to |
|
|
| ||
find what kind of programmes are |
| CATEGORY SETTING | |||
recorded by the character and the | ≥MOVIE | ≥SPORT | |||
icon indications. |
| ≥MUSIC | ≥CHILD | ||
| ≥DRAMA | ≥NEWS | |||
|
|
| ≥EDUCA | ≥OTHER | |
1 | Press [Cursor] (37) (1) while | ≥DOCUM | ≥– – – – – | ||
SELECT: |
| END : MENU | |||
| |||||
| the Jet Navigator list appears. |
|
|
| |
| Then, select the desired |
|
|
|
|
| category by pressing [Cursor] (37) (3421). | ||||
2 | Press [MENU] (7). |
|
|
|
|
|
|
|
|
| |
| Category | Indication | Icon | ||
MOVIEMOVIE
MUSICMUSIC
DRAMADRAMA
EDUCATIONEDUCA
DOCUMENTARYDOCUM
SPORTSSPORT
CHILDRENCHILD
NEWSNEWS
OTHERSOTHER
To Delete the Jet Navigator Data of a Single Video Cassette Tape:
Keep [CANCEL] (15) pressed for more than 5 seconds while the Jet Navigator list appears.
[ss] appears on the list.
See page 10 on the way to delete all the Jet Navigator data stored in the VCR memory.
Notes:
•The Jet Navigator list is stored in each cassette.
•Signals approximately 10 seconds before and after the current tape position are checked. (During this checking, [CHECKING JET NAVIGATOR DATA.] is displayed on the TV screen.)
•Checking cannot be performed properly when signals are attempted to be checked at portions of the tape where there are no signals such as at unrecorded portions of the tape. In this case, press [NAVI] (4) at a portion of the tape where a programme has been recorded of this VCR. This will allow signal checking to be performed more reliably. When a signal is still not found, [CAN NOT FIND JET NAVIGATOR DATA.] is displayed on the TV and you cannot find the beginning of the programme.
•Up to 20 cassettes and 50 programmes can be registered.
•If 50 recorded programme data are already stored in memory and you attempt to store timer recording data for another programme, the message [REMAINING PROGRAMME 0. DELETE JET NAVIGATOR DATA.] appears. If you attempt to make a new recording, this same message also appears after you insert the cassette and the Jet Navigator data is checked. As each timer recording or manual recording is finished, the programme data is deleted, starting from the oldest data.
•When a new programme is attempted to be recorded after programmes equivalent to 20 cassettes are already stored in memory, [REMAINING CASSETTE 0. FOR JET NAVIGATOR.] is displayed. Programmes recorded without deleting data as instructed are not registered in the list.
18
