Kodak DCS600 manual Camera Properties, Setting Display Off Time, Setting PowerSave Time

Camera Properties

You can set the following camera properties using camera controls: Display Off time, Powersave time, Resolution, Enable Sharpening, Use FOLDER01,and Total Actuations.

☛The list of properties may change as new versions of firmware become available. The wording in the screens may not be exactly as shown.

Setting Display Off Time

You can change the Display Off time (the length of time before the Image LCD panel turns off). Extended use of the Image LCD panel can drain your battery.

The Display Off Time screen (and the PowerSave screen) operate a little differently than the others.

1 Select the Menu icon, then choose Properties from the dropdown menu. Refer to “Navigation Techniques” on page 2-14.

2 Select Display Off Time from the Properties menu.

The Display Off Time screen appears.

3 Press and hold the Display button and press the left or right side of the Navigate switch to highlight the desired number.

4 Press and hold the Display button and press the top or bottom of the Navigate switch to change a number.

Setting PowerSave Time

Change the PowerSave time using a procedure similar to that described for changing Display Off time.

4

Configuring

4-3