Kodak DCS600 manual Panel

Number	Function	Your Option	LCD
			Panel
10	Drive rate in CL (DCS 620 and 620x only)	2.0 fps	10-0
	At the default setting, the frame rate is 2.0 fps.
		2.5 fps	10-1
	To change the frame rate to 2.5 fps, select 10-1.
	Custom Setting #10 is not available on the DCS
	660 or 660M. The frame rate is always 0.15 fps.
11	Alert LED in buLb exposure:	Does not blink	11-0
	To enable the alert LED to blink during buLb	Blinks	11-1
	exposure, select 11-1.
12		Reserved	12-0
13		Reserved	13-0
14	Center-Weighted Metering:	Default: 75%	14-0
	In Center-Weighted Metering, 75% of the	concentration in
		12 mm diameter
	meter’s sensitivity is concentrated in the
		area
	12 mm-diameter circle within the viewfinder
	and 25% of the sensitivity is outside this circle.	75%	C8,
	To change the size of the circle to 8 mm,	concentration in 8	C12,
	12 mm, 15 mm, 20 mm diameter, or to the	mm, 12 mm, 15	C15,
	average of the entire viewfinder, select C 8, C	mm, 20 mm	C20, A
	15, C 15, C 20, or A.	diameter area.
15	Time delay for auto meter-switch-off:	Default: 8	15-0
	The camera meter remains on approximately 8	seconds
	seconds after the Shutter Release button is	4, 8, 16, 32	L4,L8,
	pressed. To change the delay time to 4, 16, or 32	seconds	L16,
	seconds, select L 4, L 8, L 16 or L 32.		L32
16	Self-timer duration:	Default: 10	16-0
	At the default setting, the shutter is released 10	seconds
	seconds after the Shutter Release button is fully	2 to 60 seconds	L2, L3,
	depressed. To change the delay time to 2 to 60		L4, …,
	seconds in one second steps, select L 2, L 3,		L60
	L 4, … or L60.

13-36