Kodak DCS600 manual

Image Capture:

✔DCS 620, 620x: 0.5 frame/second continuous frame rate with 3.5 frame/second burst for 12 images

DCS 660, 660M: 0.15 frame/second continuous frame rate with 1.0 frame/second burst for 3 images

✔Vertical shooting controls

✔Intervalometer allows you to set your camera to capture a series of images automatically

✔Global Positioning System option determines the latitude and longitude of the camera

✔Dynamic Autofocus for moving subjects, and choice of five fixed Single Autofocus areas

✔Two autofocus modes: Continuous Servo AF and Single Servo AF

Other features:

✔Image LCD panel where you can perform functions such as setting the date/time, formatting a PC Card, deleting images, displaying a histogram, and specifying camera properties.

✔Back Status LCD panel displays camera and digital information (white balance, frame#, remaining frames, battery level, PC Card present, and microphone active).

✔3D Color Matrix Metering

✔Flexible Center-Weighted Meter

✔Custom Settings for added versatility

✔1/300 High-Speed Flash Sync (with Custom Setting; 1/250 sec. and slower at normal setting)

✔High speed IEEE 1394 serial interface connector

✔AC adapter connector on camera

✔Removable rechargeable battery

✔Self-diagnostic double-bladed shutter tested to over 100,000 cycles

You can attach your camera to one of several computers, then move your images from the camera to the computer using the DCS Host software included on the DCS Host Software CD. (Refer to the KODAK PROFESSIONAL DCS Host Software User’s manual, on the CD.) You can then use the images in other applications or edit them with your image editing software.

2-2