Kodak DCS600 manual Focus Mode, Autofocus

Focus Mode

Your camera has two focus modes: autofocus and manual.

Autofocus

There are two default Autofocus modes:

✔Single Servo AF with Focus-Priority

✔Continuous Servo AF with Release-Priority

In either of these modes—and in any Drive mode—focus tracking is automatically

activated when the subject starts moving. Exceptions to this are when you are using Single Servo AF mode and the focus has already locked, or you are using Continuous Servo AF mode and are pressing the AE-L/AF-L button. Refer to the “Single Servo AF with Focus- Priority (Stationary Subject)” section on page 9-7 or the “Continuous Servo AF with Release-Priority” section on page 9-9.

☛Do not attempt to turn the lens focusing ring or impede its rotation when the focus mode selector is set to Single Servo AF (S) or Continuous Servo AF (C).

Custom Settings provide two Autofocus mode variations:

CUSTOM	You can use Custom Setting #1 to assign Release-Priority to Single
	Servo AF, and Custom Setting #2 to assign Focus-Priority to
	Continuous Servo AF. Refer to “Custom Settings” on page 13-32.

9-6