ISO

SLOW

 

REAR

BKT

CUSTOM

AUTO

 

6Insert one or two batteries in the slots in the battery charger.

If you are charging one battery, you can use either slot.

On average, a battery is charged in approximately one hour. If two batteries are inserted, they are charged simultaneously.

7Once the green light turns on, wait four hours, then remove the battery or batteries from the charger.

If you don’t wait two hours, batteries will only be charged to 80% of capacity.

8Insert a charged battery into the camera.

9Close the camera door.

The Battery icon is displayed on the Back Status LCD panel when a battery is in the camera, the camera is turned on, and the camera is not in PowerSave mode (page 3-11).

The Battery icon is not displayed if the AC adapter is connected.

3

If your battery charger does not function as expected, check the following:

The wall adapter is properly connected.

There are no foreign objects lodged in the pockets.

The batteries are inserted so that they properly mate with the connector in the bottom of the pocket.

No harm will come to your batteries if you leave them in the charger for an extended period of time.

Power

3-9

Page 71
Image 71
Kodak DCS600 manual Iso