Kodak DCS600 manual 13-29

3 With all auto exposure modes, close the eyepiece shutter before starting the self-timer to prevent stray light from entering the viewfinder and affecting the exposure.

4 Fully depress the Shutter Release button.

The Self-timer LED starts blinking and the shutter will be released after 10 seconds. During the final two seconds, the LED stays on, warning you to get ready to capture the image.

☛ To cancel the self-timer operation, turn the Drive mode/Self-timer selector to another position.

CUSTOM	You can use Custom Setting #16 to change the self-timer duration to
	any interval from 2 to 60 seconds. Refer to “Custom Settings” on
	page 13-32.

In Single Servo AF with Focus-Priority, the self-timer operates only when the green in-focus indicator • appears in the viewfinder. Once the self-timer starts, the shutter will be released even if the subject is out of focus at the time of shutter release.

When you select buLb the shutter speed automatically sets to 1/250 second.

13

Advanced

13-29