Kodak DCS600 manual Continuous Servo AF with Release-Priority

☛After capturing images with the Drive mode set to S, you do not have to remove your finger from the Shutter Release button to capture the next image. Slightly release pressure on the button so it is only half-depressed, then fully depress it to release the shutter again. The focus setting remains locked unless you remove pressure on the button.

With the Drive mode set at CL, CH or CS, the camera refocuses every time the shutter is released.

CUSTOM	The	and which appear in the viewfinder display in Autofocus
	mode can be canceled using Custom Setting #23. Refer to “Custom
	Settings” on page 13-32.
Continuous Servo AF with Release-Priority
		1 Set the Focus Mode selector to
		C for Continuous Servo AF.
		2 Lightly press the Shutter
		Release button.
		Autofocus begins and the lens
		continues to focus for as long as
		you keep the Shutter Release
		button lightly pressed. Because
		the priority is on shutter release,
	C	you can fully depress the Shutter
	S	Release button regardless of
	M	focus status. Whenever the
		subject distance changes due to
		recomposition or movement of
		the subject, your camera
		refocuses at the new distance.

9

Focusing

9-9