Kodak DCS600 manual Using the SB-28D

Using the SB-28D

A
ISO
0.6 0.8	1	1.5	2	3	4	6	9	13	18	m
				mm						STBY
ZOOM
ZOOM MODE				SEL
FLASH								ON / OFF

.

1Turn on the camera.

2Turn the Speedlight On by pressing its ON/OFF button for approximately 0.5 seconds.

The Speedlight’s Ready light comes on as soon as the flash is recycled and ready to fire.

☛If your subject is relatively far off, wait several seconds after the Ready light turns on before capturing the image.

3Aim the camera at the subject.

4Press the Shutter Release button to capture the image.

☛If the Ready lights on the Speedlight and inside the camera viewfinder blink for approximately 3 seconds after you capture the image, the light may be insufficient for correct exposure. If this occurs, use a wider aperture or move closer to the subject before capturing any more images.

5Wait for a few seconds until the Ready light comes on again indicating that the flash is ready. Capture a few more images, changing exposure compensation on the flash or on the camera, as needed.

11-10