Kodak DCS600 Enabling/Disabling Standby Mode, Waking the SB-28D or SB-28DX from Standby mode

Standby Mode

The SB-28D features a Standby mode that helps conserve the battery in your Speedlight. When the Speedlight is in this mode, it will go to sleep if you don’t touch any camera or Speedlight controls for 80 seconds. STBY appears in the Speedlight’s LCD panel when the flash is in Standby mode.

Enabling/Disabling Standby Mode

You can enable or disable Standby mode according to your personal preference.

A
ISO
0.6 0.8	1	1.5	2	3	4	6	9	13	18	m
				mm						STBY
ZOOM
ZOOM MODE				SEL
FLASH								ON / OFF

Hold the Speedlight’s MODE button and press its ON/OFF button.

If the Speedlight was in Standby mode, Standby mode will be disabled. If not, Standby mode will be enabled.

STBY appears in the Speedlight’s LCD panel when the Speedlight is in Standby mode.

Waking the SB-28D or SB-28DX from Standby mode.

If your Speedlight goes to sleep while in Standby mode, you can “wake” it by doing the following:

O
F
F	O N
MODE

Lightly press the camera’s Shutter Release button.

The Speedlight wakes up automatically

S

CL

11-4