The white arrow opposite the connector should be pointing upwards as the battery is inserted.

Some (not all) cameras have a white arrow pointing downwards (towards the camera bottom) just above the battery compartment. If your battery and your camera both have the arrows, then the arrows should be aligned as you insert the battery into the camera.

4To insert: slide the battery to the back of the battery slot and press firmly in place.

To remove: slide the battery out of the battery slot.

5Close the Battery/PC Card door.

6Turn the latch assembly clockwise and return it to its flat position.

You can insert or remove a battery while the camera is connected to an AC adapter for camera. Refer to “AC Adapter for Camera” on page 3-13.

3

Power

3-5

Page 67
Image 67
Kodak DCS600 manual Power