Kodak DCS600 manual Serial Out Mode menu appears, Menu Choice Action Comments

Serial Out Mode

When the serial port is in Serial Out mode, your camera sends data to a remotely connected device.

☛Serial In and Serial Out modes can work at the same time.

1Select Serial Out from the Serial Port menu (page 15-2).

The Serial Out Mode menu appears.

2Select your choice (described in the table below).

The setting is retained until you change it, or use the Transmit option (page 15-6). Modem is selected automatically with this option.

Menu Choice	Action	Comments
None	No data transmitted
Image Number	A text string containing the image
	number of the just-captured image
	is sent to the connected device.
Modem	Reserved for Transmit option
	(page 15-6)
Remote Release		Remote Release is automatically
		selected when you select Remote
		Release in the Serial In menu.
Sync Pulse	A +3Vdc signal with a duration
	identical to the exposure duration
	is sent to the connected device.

15

Tramsmitting

15-5