Visually inspecting the Imager

1Turn off the camera.

2Remove the lens from the camera.

3Remove the anti-aliasing or IR filter.

CAUTION:

Be very careful when removing the filter, as it is a fragile device.

4Insert a battery, if one is not present.

5Connect the camera to an AC adapter, if one is not already connected.

CAUTION:

Two sources of power are needed as a safeguard to prevent the shutter closing unexpectedly and being ruined.

6Turn on the camera.

7Select the Menu icon, then choose Main Menu from the dropdown menu (page 2-14). The Main menu appears.

8Select Imager Clean.

If there is no battery in the camera or the camera is not connected to the AC adapter, a screen informs you. Insert a battery or connect the AC adapter. Press and hold the Selector button and use the Navigate switch to select Retry.

16-6

Page 260
Image 260
Kodak DCS600 manual Visually inspecting the Imager