Kodak DCS600 Autofocus activated when the Shutter, Release button is lightly pressed, AE Lock

Number	Function	Your Option	LCD
			Panel
4	Autofocus activated when the Shutter	Activated	4-0
	Release button is lightly pressed:
		Disabled	4-1
	At the default setting, autofocus is activated and
	the lens starts focusing when the Shutter
	Release button is lightly pressed. To disable
	autofocus, select 4-1. Use the AF start button to
	start autofocus in this case
5	AE Lock:	Detected value	5-0
	At the default setting, exposure is locked based
		Controlled value	5-1
	on the conditions detected when the
	AE-L/AF-L button is pressed. In this case, the
	shutter speed/aperture combination can be
	shifted in Programmed Auto Exposure mode,
	the shutter speed can be shifted in Shutter-
	Priority Auto Exposure mode, and aperture can
	be shifted in Aperture-Priority Auto Exposure
	mode. To lock the shutter speed and aperture,
	select 5-1.
6	Direction of Command Dial rotation:	Default:	6-0
	At the default setting, turning the Command	counterclockwise
	dials counterclockwise increases the selected	Opposite:	6-1
	value or selects a certain function. To change	clockwise
	the direction to clockwise, select 6-1.
7	AE Lock when Shutter Release button is	Disabled	7-0
	lightly pressed:
		Activated	7-1
	At the default setting, exposure does not lock
	when the Shutter Release button is lightly
	pressed. To lock exposure when the Shutter
	Release button is lightly pressed, select 7-1.
8		Reserved	8-0
9	Drive rate in CH (DCS 620 and 620x only)	3.5 fps	9-0
	At the default setting, the frame rate is 3.5 fps.
		3.0 fps	9-1
	To change the frame rate to 3.0 fps, select 9-1.
	Custom Setting #9 is not available on the DCS
	660 or 660M. The frame rate is always 1.0 fps.

13

Advanced

13-35