Kodak DCS600 manual Conditioning Discharging Batteries

Conditioning (Discharging Batteries)

You may occasionally need to condition a battery. You would only do so if a battery provides a noticeably shorter run time (less than 50% of normal capacity).

IMPORTANT:

Don’t condition your batteries too often or they will wear out prematurely.

1 Insert one or two batteries into the slots on the top of the battery charger.

2 Press the Condition buttons associated with the batteries that you wish to condition.

The batteries will first be conditioned, then charged. The whole process can take up to 5 1/2 hours.

3 Remove the batteries from the battery charger four hours after the green light turns on.

☛You can condition a battery in one slot while charging a battery in the other.

3-10