Setting up
Adjusting the Projector's Height
The projector is equipped with elevator feet for adjusting the image height.
Extend the adjustable feet by rotating in the direction shown in the below picture and retract by rotating in the
opposite direction.
Started Getting
Spacer | Spacer | |
(Detachable) | ||
(Detachable) | ||
|
Adjustable feet
Pull out the spacer (detachable) with the convex part of the spacer.
Rotate the rear adjustable feet with the spacer installed, the adjustable range is 3.52°.
When the spacer (detachable) is removed, the rear adjustable feet shrink to its end and the front adjustable feet stretch to its end, the adjustable range is 5.9° in the opposite direction.
Remove the spacer (detachable)
The rear adjustable feet shrink to its end
The rear adjustable feet The front adjustable feet stretch to its end stretch to its end
3.52° 
5.9°
Attention
zzHot air is expelled from the air exhaust port. Do not touch the air exhaust port directly when adjusting the adjustable feet. zzKeep the spacer out of the reach of children and store properly when it is removed.
Adjusting the Projector's Focus
To focus the image, rotate the focus ring until the image is clear.
Focus Ring
26 - ENGLISH