Test Pattern
Use this function to display
1111 Press ▲▼ to select [Test Pattern].
2222 Press ► to display the setting dialog box.
3333 Press ◄► to switch [On]/[Off].
zzIf you want to return the normal mode to the previous image, set [Test Pattern] to [Off] in the [Setting] menu.
On | Display the |
Off | Disable the function. |
Remote ID
When you use the system with multiple projectors,
you can operate all the projectors simultaneously or each projector individually using single remote control,
if a unique ID number is assigned to each projector. There are 7 different remote control IDs: [All], [ID1]~[ID6].
1111 Press ▲▼ to select [Remote ID].
2222 Press ► to display the setting dialog box.
3333 Press ◄► to select the desired item.
Attention
zz When operating the projector under [All] code, you can operate several projectors at the same time.
zz If you want to control the projector with a specified remote control ID, make sure the remote control ID on the remote control fit to the remote control ID on the projector. (Æpage 20)
Startup Logo
Set this function to display the Panasonic logo when the projector is turning on.
1111 Press ▲▼ to select [Startup Logo].
2222 Press ► to display the setting dialog box.
3333 Press ◄► to switch [On]/[Off].
On | The logo will display when the | |
projector is turning on. | ||
| ||
Off | The logo will not display when the | |
projector is turning on. | ||
|
Setting
Reset
Return all data that has been set in the menu to the factory defaults.
1111 Press ▲▼ to select [Reset].
2222 Press ► to display the setting dialog box.
3333 Press ▲▼ to select Yes.
4444 Press ► to execute.
Note
zzLamp used time has been set by user in the [Security] menu will not be reset.
Settings
ENGLISH - 45