Powering ON/OFF
ON(G)/STANDBY(R) indicator
The ON(G)/STANDBY(R) indicator informs you the status of the power. Confirm the status of the <ON(G)/STANDBY(R)> indicator before operating the projector.
<ON(G)/STANDBY(R)> indicator
Indicator status | Status | |
No illumination or flashing | The power plug is not connected to the outlet. | |
| Lit1 | The power is switched off. (Standby mode) |
|
| Press <v/b> to start projection. |
Red | Slow | The power is switched off. (Standby mode) |
Flashing2 | Press <v/b> to start projection. | |
| Flashing | The projector is preparing to switch off the power. |
| The power is switched off after a while. (Changes to the standby mode.) | |
|
| |
|
|
|
Green | Lit | The projector is preparing for projection or in the projection status. |
1 When [LAN (Standby)]/[VGA Out (Standby)]/[In Standby Mode (Audio)] are all set to [Off].
2 When one or more among [LAN (Standby)]/[VGA Out (Standby)]/[In Standby Mode (Audio)] is/are set to [On].
Note
zzWhen the <ON(G)/STANDBY(R)> indicator is flashing in red, the internal fans start to operate and the projector starts cooling.
Basic Operation
ENGLISH - 31