Troubleshooting
Problem | Cause | Reference | |
page | |||
|
| ||
| zz Dust Filter Reminder Message: |
| |
|
| 59 | |
| This message displays when the projector reached the timer set in |
| |
| the [Filter Reminder (Hour)]. In this case, please clean the air filters or |
| |
| replace them. |
| |
| zz Lamp Warning Message: |
| |
|
| 62 |
Messages displays
The lamp has reached its end of life, please replace it as soon as possible.
zz Fan Locked Warning Message:
This shows the fan has stopped during projection and the power will be |
|
shut off soon. Unplug the power cord from the outlet and contact your |
|
dealer for details. | 58 |
zz Temperature Fail Message : |
|
The internal temperature is too high and the power will be shut off soon, please confirm the display items.
Attention
zzPlease contact your dealer if the projector still can not be operated normally after following the instructions above.
Note
zzThe <AUTO ADJ.> operation may not optimize the image position or the resolution, depending on the input signal format or the image contents. In this case, switch to a different image and execute <AUTO ADJ.> again.
Maintenance
66 - ENGLISH