Before using the Remote Control Unit
Operating range of the remote control unit
Point the remote control unit toward the remote control signal receptor on the front or the rear of the Projector to operate the Projector. Refer to the illustration below for the operating range of the remote control unit.
<Top view>
Remote Control Unit | Projector | Remote Control Unit |
|
| (approximately 7 m) |
(approximately 7 m) |
|
|
(When operating from in front) |
| (When operating from behind) |
<Side view> |
|
|
Remote Control Unit | Projector | Remote Control Unit |
(approximately 7 m) |
| (approximately 7 m) |
|
| |
(When operating from in front) |
| (When operating from behind) |
Note
•The operating distance is within 7 meters (approximately 23.0 feet) from directly in front of the front or rear remote control signal receptors.
•If strong light is allowed to shine onto the remote control signal receptor, or if there are any obstacles between the remote control signal receptor and the remote control unit, correct remote control operation may not be possible.
If facing the remote control unit toward the screen
The Projector can also be operated by pointing the remote control unit toward the screen as shown in the illustration below.
Screen
Projector
Remote Control Unit
Note
If facing the remote control unit toward the screen to operate the projector, the operating range of the remote control unit will be limited by the amount of light reflection loss caused by the characteristics of the screen used.
11
