Panasonic PT-D7700U, PT-DW7000U manual Press the Enter button to display, Option screen, and select

Replacement of lamp unit

8.Insert the power cord plug into the wall outlet and then press the MAIN POWER switch.

Caution • If the power does not turn on (power indicator lamp (red) does not turn on) even after turning the MAIN POWER switch “I”, turn the MAIN POWER “O”, confirm that the lamp unit and door are installed correctly, and turn on again.

9. Press the “I” (POWER) button so that a picture is projected onto the screen.

10.Press the “MENU” button to display

the MAIN MENU screen, and then press the and buttons to move the cursor to select “OPTION”.

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

LANGUAGE

OPTION

TEST PATTERN

SIGNAL LIST

SECURITY

11. Press the “ENTER” button to display				OPTION
the “OPTION” screen, and select
					PROJECTOR ID	2
“SYSTEM INFORMATION” with the					SETTING	FRONT-F
					LAMP SELECT	DUAL
and	buttons.				LAMP POWER	HIGH
					RS232C SETTING
					OSD POSITION	2
					SYSTEM INFORMATION
					COLOR MATCHING	3COLORS
					VIDEO SETTING
					AUTO SETUP
					:MENU SELECT
				ENTER:SUB MENU
12. Press the “ENTER” button.				SYSTEM INFORMATION
The SYSTEM INFORMATION screen will be
					ROM VERSION:		1.00
displayed.					SET RUNTIME:		1433h
					LAMP1	TYPE:	LAD7700
						LOW:	0h
						HIGH:	1433h
						TOTAL:	1433h
					LAMP2	TYPE:	LAD7700
						LOW:	0h
						HIGH:	1100h
						TOTAL:	1100h
13. Press and hold the “ENTER” button
				LAMP RESET
on the projector or the remote control
					LAMP1
for approximately 3 seconds.					LAD7700	1433h
					LAD7700L	0h
An item “LAMP RESET” will be added.					LAMP2
					LAD7700	1100h
14. Select the lamp which has been
					LAD7700L	0h
replaced with the		and	buttons.
LAMP1: Replace the LAMP UNIT 1
LAMP2: Replace the LAMP UNIT 2
					:SELECT ENTER:EXECUTE
15. Press the “ENTER” button. When
				LAMP RESET			OK?
“OK?” is displayed, press the
					LAMP1
“ENTER” button.					LAD7700	1433h
					LAD7700L	0h
The used hours of the specified lamp unit will be					LAMP2
reset to zero.					LAD7700	1100h
					LAD7700L	0h
When more than one lamp has been replaced,
repeat the procedure from step 14.

102