Panasonic PT-DW7000U, PT-D7700U manual Raster position

ADVANCED MENU					Press the “ENTER” button.
	DIGITAL CINEMA REALITY	AUTO			The ADVANCED MENU screen will be displayed.
	FORMAT	SMPTE
					Select “SYNC.TERM” with the
	BLANKING
	INPUT RESOLUTION
					buttons.
	CLAMP POSITION
	EDGE BLENDING	OFF			Switch the input impedance (signal
	SYNC.TERM	75
	RASTER POSITION				level) of the synchronization signal
					with the	buttons.
	:MENU SELECT				• These buttons toggle between 75 Ω and HI-Z
					(TTL).
	:CHANGE
			SYNC.TERM		Signal level		Input impedance
				75 Ω	Amplitude: 0.6V[p-p] to 4.0V[p-p]		75 Ω
			HI-Z (TTL)		High level: 2.0 V or over		1 kΩ
					Low level: 0.8 V or lower

Note • Switch the input impedance according to the input signal.

•The factory default is 75 Ω.

•The clock phase and image position may become out of balance during this switching operation. Please make readjustment accordingly.

Raster position

When the whole area where the input picture can be displayed is not used, the picture can be moved to any position inside the display area.

Procedure of adjustment

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

LANGUAGE

OPTION

TEST PATTERN

SIGNAL LIST

SECURITY

ADVANCED MENU

DIGITAL CINEMA REALITY AUTO

FORMATSMPTE

BLANKING

INPUT RESOLUTION

CLAMP POSITION

EDGE BLENDING OFF

SYNC.TERM75

RASTER POSITION

Press the “MENU” button.

The MAIN MENU screen will be displayed.

Select “ADVANCED MENU” with the buttons.

Press “ENTER” button.

The ADVANCED MENU screen will be displayed.

Select “RASTER POSITION” with the buttons.

RASTER POSITION

V:0

H:0

Press the “ENTER” button.

The RASTER POSITION screen will be displayed.

Adjust the position with the , , and buttons.

Press the “MENU” button three times.

The on-screen indications disappear and the normal screen appears again.

(Continued on next page)

67