![](/images/new-backgrounds/1149325/14932511x1.webp)
Precautions with regard to safety
Do not place liquid containers on top of the projector.
•If water spills onto the projector or gets inside it, fire or electric shocks could result.
•If any water gets inside the projector, contact an Authorized Service Center.
Do not insert any foreign objects into the projector.
•Do not insert any metal objects or flammable objects into the projector or drop them onto the projector, as doing so can result in fire or electric shocks.
After removing the battery from remote control unit, keep it away from the reach of children.
•The battery can cause death by suffocation if swallowed.
•If the battery is swallowed, seek medical advice immediately.
Do not allow the + and - terminals of the battery to come into contact with metallic objects such as necklaces or hairpins.
•Failure to observe this may cause the battery to leak, overheat, explode or catch fire.
•Store the battery in a plastic bag and keep it away from metallic objects.
Insulate the battery using tape or similar before disposal.
•If the battery comes into contact with metallic objects or other batteries, it may catch fire or explode.
Replacement of the lamp unit should only be carried out by a qualified technician.
•The lamp unit has high internal pressure. If improperly handled, explosion might result.
•The lamp unit can easily become damaged if struck against hard objects or dropped, and injury or malfunctions may result.
Caution
Do not set up the projector in humid or dusty places or in places where the projector may come into contact with smoke or steam.
•Using the projector under such conditions may result in fire or electric shocks.
When disconnecting the power cord, hold the plug, not the cord.
•If the power cord itself is pulled, the cord will become damaged, and fire,
Always disconnect all cables before moving the projector.
•Moving the projector with cables still attached can damage the cables, which could cause fire or electric shocks to occur.
Do not place any heavy objects on top of the projector.
•Failure to observe this may cause the projector to become unbalanced and fall, which could result in damage or injury.
Do not
•Failure to observe this may cause the battery to overheat, leak, explode or catch fire, and burns or other injury may result.
When inserting the battery, make sure the polarities (+ and
•If the battery is inserted incorrectly, it may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result.
Use only the Specified battery.
•If an incorrect battery is used, it may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result close to this port, otherwise burns or damage could result.
6