Panasonic PT-D7700U, PT-DW7000U manual Output resolution D7700U only, Auto signal, Fan control

Option settings

Output resolution (D7700U only)

Pictures projected onto a screen (for SXGA) with a 5:4 aspect ratio can be displayed with the SXGA resolution.

Auto signal

When unregistered signals are to be input frequently because the unit is used at conferences or other venues, the screen display position can be adjusted automatically without having to press the AUTO SET UP button on the remote control each time.

Press the “MENU” button.

The MAIN MENU screen will be displayed.

Select “OPTION” with the buttons.

Press “ENTER” button.

The OPTION screen will be displayed.

Select “OUTPUT RESOLUTION” with

the buttons.

OPTION

OUTPUT RESOLUTION	SXGA+
AUTO SIGNAL	ON
FAN CONTROL	NORMAL
P IN P	OFF
FUNC1	P IN P
PASSWORD

:MENU SELECT :CHANGE

Switch between “SXGA+” and “SXGA”

with the buttons.

SXGA+ (1 400 x 1 050): For projecting pictures onto a screen with an aspect ratio of 4:3.

SXGA (1 280 x 1 024): For projecting pictures onto a screen with an aspect ratio of 5:4.

Press the “MENU” button.

The MAIN MENU screen will be displayed.

Select “OPTION” with the buttons.

Press “ENTER” button.

The OPTION screen will be displayed.

Select “AUTO SIGNAL” with the buttons.

OPTION

OUTPUT RESOLUTION	SXGA+
AUTO SIGNAL	ON
FAN CONTROL	NORMAL
P IN P	OFF
FUNC1	P IN P
PASSWORD

:MENU SELECT :CHANGE

Switch between “ON” and “OFF” with

the buttons.

If unregistered signals are input when “ON” is selected, auto setup will be initiated automatically.

Fan control

When using the projector over 1 400 m (4605.3') above sea level, set to “HIGHLAND”.

FAN CONTROL NORMAL

HIGHLAND

78