Accessories, Do not use the old lamp unit | Panasonic PT-DW7000U

Do not look into the lens while the projector is being used.

•Strong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes.

Do not bring your hands or other objects close to the air outlet port.

•Heated air comes out of the air outlet port. Do not bring your hands or face, or objects which cannot withstand heat.

Do not use the old lamp unit.

•The lamp section may break.

Replacement of the lamp unit should only be carried out after it has completely cooled off, otherwise burns may result.

Disconnect the power cord plug from the wall outlet as a safety precaution before carrying out any cleaning.

•Electric shocks can result if this is not done.

Ask an Authorized Service Center to clean inside the projector at least once a year.

•If dust is left to build up inside the projector without being cleaned out, it can result in fire or problems with operation.

•It is a good idea to clean the inside of the projector before the season for humid weather arrives. Ask your nearest Authorized Service Center to clean the projector when required. Please discuss with the Authorized Service Center regarding cleaning costs.

Do not reach for the openings beside the optical lens, during horizontal or vertical movements of the lens there is a injury hazard.

An effort to keep our environment clean, Please bring the non repairable unit your Dealer or a Recycling Company.

Accessories

Check that all of the accessories shown below have been included with your projector.

Remote control unit [N2QAGB000024 x 1]

ON POWER OFF

		AUTO
		SETUP
RGB	RGB	AUX
1	2	AUX
		SHUTTER
VIDEO	S-VIDEO	SHUT
MENU	FREEZE

PAGE UP

ENTER

PAGE DOWN

ON SCREEN

1 STD 2 OSD 3 SYSTEMSEL

			D.ZOOM
	4	FUNC	5	6
	4	1	5	6
			BRIGHT	CONTRAST
	7 LENS		8	9
		NEXT	ASPECT	0 USER
		LIGHT	ID ALL	ID SET
	Computer			LASER ON/OFF
	Computer			Projector
		Numetric		Projector

Power cord [K2CF3EH00001 x 1]

Wired cable for remote control [15m (49'3"), K1EA03NA0001 x 1]

Battery for remote control unit (AA)

[R03NPA/2ST x 1]

7

Image 7

Panasonic PT-DW7000U, PT-D7700U manual Accessories, Do not look into the lens while the projector is being used

Contents

Commercial Use PT-DW7000U Model number PT-D7700U / PT-DW7000U Dear Panasonic CustomerPage Contents Precautions with regard to safety Do not insert any foreign objects into the projector Insulate the battery using tape or similar before disposalUse only the Specified battery Do not place liquid containers on top of the projector Do not look into the lens while the projector is being used AccessoriesDo not use the old lamp unit Precautions on handling Examples of system expansion When the operation mode selector is set to Projector Remote controlName and function of parts When the operation mode selector is set to Computer Front and side of the projector Rear view of the main unit Controls on rear panel RGB YPBPR1 input terminal pages 26 Side-mounted connection terminalsVideo in terminal Video OUT terminal Effective range of remote control operation Using the remote control unitLoading dry cells Setting projector ID number to remote control Using a wired remote control Using the remote control as a PC mouseOperation mode selector switch Projection scheme InstallationAdjusting the leveling feet Installation geometry Projection distance SH Effective screen height Installation 11810 ET-D75LE3 Aspect ratio Projection distance L formula Units m Before starting connection Connection· SYNC/Y SDA HD/SYNC SCL Video deck TBC built-in Color monitor Control PC Example of connecting with Video devicesVideo deck TBC built-in High-vision video deck Example of connecting with personal computers Signal selector Example of connecting with the signal selector Installing the input module Installation of input module optionalTypes of the input modules optional Procedure of installation ET-MD95RGB Connecting signals to the input module SUB BNC Connecting the signal to the analog RGB signal input moduleConnecting the component signals RGB signal input module optional Connecting the video signals Connecting the signal to the video signal input moduleVideo signal input module optional Connecting the component signals Serial digital input module optional ET-MD95SD2 for 480p/480i/576i Auto Pin No Signal Connecting signals to the DVI signal input moduleDVI-D input module optional How to remove the projection lens How to install the projection lens Roughly adjust the focus of the lens. Refer to Powering up the projectorMaking adjustment and selection Press the l button. on the main unit or the remote control Projection Powering off the projector Adjustment range after lens position optical shift How to adjust the lensChoose an item and adjust it using Buttons How to adjust the lens for addressing unevenness of focusing Automatic adjustment Auto Setup Press the Menu button Registration of input signal dataRenaming the registered signals Registration of new data Clearing the data of registered signals How to erase sub memory How to register into sub memorySub memory Memory no A1 On-screen indicationsRestrictions Using the Shutter function Using the Freeze functionUsing the digital zoom D.ZOOM + function Structure of menu screens On-screen menus Returning to the previous screen Menu items settingResetting to the factory default Basic operations on menu screen Switching the picture mode Adjusting the pictureSelect Picture with the buttons Press the Enter button Adjusting Contrast / Bright / Color / Tint Select Picture with Registering the picture mode settings as presettingsSelect OK with Buttons Press the Enter button Select the Dynamic Iris setting with Buttons Dynamic Iris setting Operation Adjustment Remarks Adjusting the color temperature To display pictures complying with the sRGB standard Procedure of adjustmentAdjustment items Operation Sharpness / Gamma / Noise reduction Shift adjustment Adjusting the position Size adjustment Size modes Clock phase adjustmentSelect Clock Phase with Adjust the clock phase with Select Keystone with the buttons Press the Enter button Adjust the Keystone horizontally With the buttonsAdjust the vertical Linearity with Buttons Keystone distortion correction Select Advanced Menu with the buttons Press Enter button How to use Advanced MenuSignal level Format To input Betacam with YCbCr Select Blanking with the buttons Press the Enter button Blanking adjustment Total DOTS, Display DOTS, Total Lines and Display Lines Adjusting the input resolution Select Advanced Menu with the buttons Press the Enter button Adjusting the clamp position Specify the area to be adjusted with the buttons Edge blending adjustmentAdjustment marker Select Advanced Menu with the buttons Edge blending adjustment continuing Raster position Raster position continuing When 54 pictures are displayed when Sxga signals are inputWhen 43 pictures are displayed Changing the display language How to change the system format How to use RGB Reality mode ID number need not be set when only one projector is used Option settingsID number setting Procedure of setting FRONT-F FRONT-C REAR-C REAR-F Installation Setting Lamp select Lamp power Press and buttons to select Option Press and buttons to select RS232C SettingPosition of on-screen indications System information These values can be adjusted from 0 to 2 Adjustment Adjusting color matchingSelect Option with the buttons Press Enter button Select Target Data with the buttons Press the Enter button Adjusting the color matching using a colorimeterSelect Measured Data with Buttons Press the Enter button Using the buttons, switch to the desired mode Video settingAutomatic adjustment Using the buttons, select Auto Setup Press the Enter button Auto signal Output resolution D7700U onlyFan control Use the buttons to select OFF, User 1, User 2, or User Password Setting FUNC1List of P in P How to change the signal for the ET-MD95VM2 optional Examples of connection Using the serial terminalsPin assignments and signal names Communication conditions Factory setting Connecting to a PC Computer Projector DTE specifications Control commandsCable specifications Command External appearance Using the Remote 2 terminalPin assignments and control Sub 9-pin female RS-422 control functions Displaying the internal test patternCycle of displayed internal test patterns Setting the password Setting the securitySelect Security with the buttons Press the Enter button Changing the text Changing the passwordSetting the text Set the password with the , , and buttons Select CP Option with the buttons How to use CP OptionSetting the on-screen indication function Hold down the Menu button for 3 or so seconds Setting the system format Example of connection How to use network module optionalName and function of network module parts Initial setting of network module Port No Initial setting of network module continuingAccessing from the Web browser Items Function Description Top Network setting Network setting Advanced control Monitor information Mail settingSmtp Mail setting page continuing Image file control Monitor Indication of monitor lampLamp Information Checkpoint Remedial measure Indication Dismantle the air filter Cleaning and replacement of air filterProcedure of cleaning Clean the air filter Timing of lamp unit replacement Replacement of lamp unit 101 Procedure of lamp unit replacement System Information with On the projector or the remote controlPress the Enter button to display Option screen, and select No image appears on Symptoms CheckpointPower does not turn on Remote control does Specifications Video signal input module Length of power supply cord CabinetOutside dimensions Remote control Power source Appendix Compatible RGB/YPBPR Signals Trademark Acknowledgement Outside dimensions Concernant LA Sécurité Ne pas retirer le couvercle ou le modifier Précautions concernant la sécuritéNe pas couvrir le filtre et la sortie d’air Ne pas surcharger la prise de courant Ne pas mettre d’objets étrangers dans le projecteur Ne pas placer le projecteur sur des surfaces instablesNe pas placer des récipients de liquide sur le projecteur Ne démontez pas le bloc lampe ’utiliser que la pile indiquée Ne pas placer d’objets lourds sur le projecteurNutilisez pas un bloc lampe usagé Précautions pour la manipulation Nettoyage et maintenanceMise au rebut Période de remplacement de la lampe Remplacement de la lampe La lampe est chaude si elle vient d’être utilisée Procédure de remplacement de la lampe 115 Panasonic Canada Inc Technical Support