Panasonic PT-D7700U, PT-DW7000U Connection, Before starting connection, · Sync/Y Sda Hd/Sync Scl

Connection

Before starting connection

Before connection, read carefully the instruction manual for the device to be connected. Turning off the power switch of the devices before connecting cables.

If any connection cable is not supplied with the device, or if no optional cable is available for connection of the device, prepare a necessary system connection cable to suit the device.

Video signals containing too much jitter may cause the images on the screen to randomly wobble or wafture. In this case, a time base corrector (TBC) must be connected.

The projector accepts the following signals: video, S-Video, analog RGB and digital signals from the PC. Some PC models cannot be connected to the projector.

The pin-out and signal names of the S-VIDEO IN terminal are shown in the diagram below.

Pin No.	Signal
	Ground
	(luminance signal)
	Ground (color signal)
Outside view	Luminance signal
	Color signal

The pin-out and signal names of the RGB2 input terminal are shown in the diagram below.

Outside view

Pin No. Signal

R/PR

G/G · SYNC/Y

PB

SDA

HD/SYNC

VD

SCL

and	are not assigned.
~ ,	and	are GND terminals.
and	are effective if the PC has the corresponding

functions.

24