Panasonic PT-DW7000U How to use Advanced Menu, Format To input Betacam with YCbCr, Signal level

How to use ADVANCED MENU

DIGITAL CINEMA REALITY

Increase the vertical resolution when the PAL (or SECAM) 576i signal input or the NTSC 480i signal input is applied.

Procedure of adjustment

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

LANGUAGE

OPTION

ADVANCED MENU

DIGITAL CINEMA REALITY AUTO

FORMATSMPTE

BLANKING

INPUT RESOLUTION

CLAMP POSITION

EDGE BLENDING OFF

SYNC.TERM75

RASTER POSITION

Press the “MENU” button.

The MAIN MENU screen will be displayed.

Select “ADVANCED MENU” with the buttons.

Press “ENTER” button.

The ADVANCED MENU screen will be displayed.

Select “DIGITAL CINEMA REALITY”

with the buttons.

OFF: Unforced cinema processing

AUTO: Performs automatic detection and cinema processing. (factory default)

30p FIXED: Forced cinema processing (2:2 pulldown) is performed when a 480i signal is input.

25p FIXED: Forced cinema processing (2:2 pulldown) is performed when a 576i signal is input.

Note • In DIGITAL CINEMA REALITY mode, the image quality will be deteriorated if 30p FIXED or 25p FIXED is selected when the signal is not a 2:2 pulldown signal.

FORMAT (To input BETACAM with YCbCr 480i)

When receiving a picture of 480i with analog component signal YCbCr input, the input level of Cb and Cr can be switched.

Procedure of adjustment

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

LANGUAGE

OPTION

TEST PATTERN

ADVANCED MENU

DIGITAL CINEMA REALITY AUTO

FORMATSMPTE

BLANKING

INPUT RESOLUTION

CLAMP POSITION

EDGE BLENDING OFF

SYNC.TERM75

RASTER POSITION

:MENU SELECT :CHANGE

Press the “MENU” button.

The MAIN MENU screen will be displayed.

Select “ADVANCED MENU” with the buttons.

Press “ENTER” button.

The ADVANCED MENU screen will be displayed.

Select “FORMAT” with the buttons.

Switch the signal format with the buttons.

•This toggles between SMPTE and BETACAM.

<Signal level>

Format	Y	Synchronous part	Cb , Cr
SMPTE	700 mV	300 mV	±350 mV
BETACAM	714 mV	286 mV	±504 mV

Note • This function is available only when input signals are supplied through the analog RGB input module (ET-MD95RGB). RGB1, RGB2 inputs do not support BETACAM signals.

•This function can be switched only when receiving the picture of 480i in the YCbCr mode.

It cannot be switched when receiving the picture of signals other than RGB-REALITY mode, RGB mode and 480i.

•SMPTE is the factory default.

61