Panasonic PT-DW7000U, PT-D7700U manual Monitor information, Mail setting, Smtp

Monitor information page

Displays the status of input slot.

Displays temperature of projector’s intake air.

Displays temperature inside the projector.

Displays temperature of projector exhaust.

Displays the lamp lit hours.

Displays used hours of the projector.

Displays self-diagnosis information.

Displays the type of	Displays the firmware version
projector.	of the projector main unit.

E-mail setting page

•This page allows the user to send mail to up to two mail addresses automatically.

Select “Enable” to	Enter the IP address of
use the E-mail	the E-mail server
function.	(SMTP).

Enter the E-mail address of your desired recipient.

Enter the E-mail address of the projector. (maximum 63 characters)

The user can enter the location of, for example, the installed projector so that the recipient may easily identify the originator of the E-mail. (maximum 63 characters)

The user can modify the minimum time interval of temperature warning mail. The default value is 60 minutes. In this case, the user cannot send another mail for 60 minutes after sending previous temperature warning mail even the set warning temperature is reached again.

The user can modify the threshold temperature for sending temperature warning mail. If the temperature rises above the set value, control sends temperature warning mail.

(Continued on next page)

95