Panasonic PT-DW7000U, PT-D7700U manual How to change the system format

How to change the system format

Pressing the SYSTEM SELECTOR button on the remote control or using the menu screen operation (page 89) enables the user to make the following changes depending on S Video / Video input or the currently selected input module.

The name of the selected system such as RGB, YPBPR and AUTO is displayed on the top left of the screen and disappears automatically.

S video / Video terminal input signal

For the setting of	:	AUTO1	NTSC	PAL	SECAM
AUTO1
			PAL60	NTSC4.43
For the setting of	:	AUTO2	NTSC	PAL-M
AUTO2
			PAL-N
RGB signal input module	:	RGB	RGB REALITY		YPBPR		For 720P and 1080i input
ET-MD95RGB
		RGB	RGB REALITY		YCbCr		For 480i, 576i, 480p, 576p input
Video signal input module							The SYSTEM SELECTOR button
							is ineffective with other types of
ET-MD95VM2							signals.
For the setting of	:	AUTO1	NTSC	PAL	SECAM
AUTO1			PAL60	NTSC4.43			For the details on the setting for
ET-MD95VM2							AUTO1, AUTO2 or YCbCr, refer
For the setting of	: AUTO2		NTSC	PAL-M			to page 81.
AUTO2
For the setting of	:		PAL-N				When the STD (standard) button
		AUTO	480i	576i
ET-MD95VM2							is pressed while changing the
YCbCr							system mode (with the SYSTEM
							SELECTOR), the projector
Serial digital input module							automatically returns to AUTO1,
							AUTO2, or AUTO.
ET-MD95SD1	:	AUTO	480i	576i
ET-MD95SD2	:	AUTO	480p	480i			576i
ET-MD95SD3	:	AUTO	1080/60i		1035/60i		720/60p		1080/24p
		1080/24sF		1080/25p		1080/30p		1080/50i

“AUTO 1”: Selection is automatically made out of NTSC, PAL, SECAM, NTSC4.43 and PAL60. “AUTO 2”: Selection is automatically made out of NTSC, PAL-M and PAL-N.

RGB1/RGB2 terminal input signals
For 720p, 1080i input:	RGB
			YPBPR
For 480i, 576i, 480p, 576p input:
		RGB		YCbCr

For the signals other than those above, SYSTEM SELECTOR button is invalid.

69