Panasonic PT-D7700U, PT-DW7000U Basic operations on menu screen, Returning to the previous screen

On-screen menus

Basic operations on menu screen

Press the “MENU” button.

The MAIN MENU appears on the screen.

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

LANGUAGE

OPTION

TEST PATTERN

SIGNAL LIST

SECURITY

:MENU SELECT

ENTER:SUB MENU

Select the desired item with the or button.

Selected items are displayed in blue.

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

LANGUAGE

OPTION

TEST PATTERN

SIGNAL LIST

SECURITY

:MENU SELECT

ENTER:SUB MENU

Press the “ENTER” button to establish your selection.

The submenu for the selected option will now open. (Example: PICTURE Menu)

PICTURE

PICTURE MODE	DYNAMIC
COLOR	50
TINT	30
COLOR TEMP.	DEFAULT
GAMMA	2.2
CONTRAST	32
BRIGHT	32
SHARPNESS	6
NOISE REDUCTION	2
DYNAMIC IRIS	1

:MENU SELECT :ADJUST

Highlight the desired adjustment item with the or button, then change or adjust the parameter value with the or buttons.

For the items such as “COLOR”, “TINT”, “CONTRAST” and “BRIGHT”, an individual adjustment screen with an individual bar graph as shown below is displayed by pressing the ENTER button.

CONTRAST 32

•If no button is operated for approx. 5 seconds while the individual adjustment screen is displayed, the screen will return to the previous page.

Returning to the previous screen

•When the “MENU” is on the screen, pressing the “MENU” button returns to the previous page.

•When the MAIN MENU is on the screen, pressing the “MENU” button clears all menus from the screen.

Menu items shown in gray characters

•Some menu items may not be valid for certain signal formats applied to the projector.

The menu items that cannot be adjusted or used are shown in gray characters, and they cannot be selected.

Menu items setting

The bottom prompt line differs on each menu depending on the selected menu option:

•A prompt “ CHANGE” appears when changing the setting.

• A prompt “ ADJUST” appears for a separate bar graph.

•When and buttons are displayed above or under the items in the “OPTION” screen, they indicate that there are more adjustment (items).

Resetting to the factory default

STD (standard) button is used to reset all of the projector adjustment values to the default levels which were set at the time of shipment from the factory. It is pressed after the respective adjustment mode screen has been displayed.

•When the Menu screen is displayed:

A “STD” indicator appears on the upper right corner of the menu.

PICTURE			STD
	PICTURE MODE	DYNAMIC
	COLOR	50
	TINT	30
	COLOR TEMP.	DEFAULT
	GAMMA	2.2
	CONTRAST	32
	BRIGHT	32
	SHARPNESS	6
	NOISE REDUCTION	2
	DYNAMIC IRIS	1

:MENU SELECT :ADJUST

50