Panasonic PT-D7700U, PT-DW7000U manual Powering off the projector, Projection

Projection

		AUTO
		SETUP
RGB 1	RGB 2	AUX
VIDEO	S-VIDEO	SHUTTER
MENU	LENS	ENTER

ON POWER OFF

		AUTO
		SETUP
RGB	RGB	AUX
1	2
		SHUTTER
VIDEO	S-VIDEO	SHUT

MENU FREEZE

PAGE UP

ENTER

PAGE DOWN

ON SCREEN

1 STD 2 OSD 3 SYSTEMSEL

		D.ZOOM
4	FUNC	5	6
	1
		BRIGHT	CONTRAST
7 LENS		8	9
	NEXT	ASPECT	0 USER
	LIGHT	ID ALL	ID SET
Computer			LASER ON/OFF
			Projector
	Numetric

Powering off the projector

Press the POWER OFF “ ” button.

Select “EXECUTE” with or button and press the ENTER button.

(or press the POWER OFF “ ” button again.)

The projection of the image stops, and the power indicator lamp of the main unit lights up orange. (The cooling fan keeps running.)

Wait until the power indicator lamp of the main unit turns to red (i.e., until the cooling fan stops). (Approx. 4 minutes)

While the cooling fan is still running, never turn off the MAIN POWER switch, nor unplug the projector from the outlet.

Note

•Turning on the power supply will not light up the light source lamp if the lamp is in the process of cooling down after turning off the power supply. To light up the lamp, turn on the power supply again when the lamp has been cooled sufficiently.

•The projector consumes approximately 12 watts of power even in standby mode after the cooling fan stops. (Power indicator lamp lit in red)

•If you re-power the projector after shutting off the main power inadvertently, the projection lamp may remain unlit. Please turn the power on again after a while.

Press the “O” marked side of the MAIN POWER switch to remove all power from the projector.

40