Panasonic PT-D7700U, PT-DW7000U manual How to use RGB Reality mode

How to use RGB REALITY mode

RGB REALITY mode converts RGB (primary colors) input signals into component signals and achieves the high- quality playback by motion-image-specific picture conversion process.

This mode is effective only when the signal input is applied to the RGB input signal module (ET-MD95RGB). The appropriate mode can be selected according to the signal. (Refer to page 69)

RGB mode: For RGB signals input from a PC etc. (mostly still images)

RGB REALITY mode: For RGB signals input from a scan converter etc. (mostly motion images)

The following are the signals that can be converted into RGB REALITY mode:

Signal name	fH(kHz)/fV(Hz)	RGB mode	RGB REALITY mode	Remarks
480i	15.73/60
576i	15.63/50
480p	31.47/60
576p	31.25/50
720/60p	45.00/60
1035/60i	33.75/60
1080/60i	33.75/60
1080/24p	27.00/24
1080/50i	28.12/50
1080/30p	33.75/30
1080/25p	28.12/25
1080/24sF	27.00/48
Others				RGB mode only

: Supported (Factory default)

: Supported (To use the signal in the mode with , select the signal with the SYSTEM SELECTOR button and register it.)

: Use the signal in the RGB REALITY mode because the signal may not be supported depending on the state of the signal.

: Not supported

Note • The automatic picture adjustment (page 43) and the adjustment of the input resolution (page 63) cannot be performed because the optimal adjustment value is preset in the RGB REALITY mode.

•The projector's adjustment functions in the RGB REALITY mode are the same as those for the YPBPR (or YCbCr) input.

•If RGB is selected using the SYSTEM SELECTOR button when the RGB signals in the above table have been input to the RGB1 and RGB2 terminals, playback with a high picture quality will be achieved automatically by the motion-image-specific picture conversion process.

70