Adjusting the clamp position | Panasonic PT-D7700U, PT-DW7000U

How to use ADVANCED MENU

Adjusting the clamp position

Use the clamp position adjustment to achieve the optimal value when dark areas of the image are crushed or displayed in green.

Procedure of adjustment

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

LANGUAGE

OPTION

TEST PATTERN

SIGNAL LIST

SECURITY

:MENU SELECT

ENTER:SUB MENU

ADVANCED MENU

DIGITAL CINEMA REALITY AUTO

FORMATSMPTE

BLANKING

INPUT RESOLUTION

CLAMP POSITION

EDGE BLENDING OFF

SYNC.TERM75

RASTER POSITION

:MENU SELECT

ENTER:SUB MENU

CLAMP POSITION

POSITION1

Press the “MENU” button.

The MAIN MENU screen will be displayed.

Select “ADVANCED MENU” with the buttons.

Press the “ENTER” button.

The ADVANCED MENU screen will be displayed.

Select “CLAMP POSITION” with the buttons.

Press the “ENTER” button.

The CLAMP POSITION screen will be displayed.

Adjust with the buttons.

The value changes from 1 to 255.

:MENU SELECT :ADJUST

The optimal value for the clamp position adjustment

•If dark areas are crushed: The optimal value is the point where the dark area is best improved.

•If the dark areas are displayed in green: The optimal value is the point where the green area becomes dark and clear.

Note • The clamp position can be adjusted only when the RGB signal input is applied with RGB1, RGB2 IN, and the analog RGB input module (optional: ET-MD95RGB).

64

Image 64

Panasonic PT-D7700U, PT-DW7000U Adjusting the clamp position, Select Advanced Menu with the buttons Press the Enter button

Contents

PT-DW7000U Commercial Use Dear Panasonic Customer Model number PT-D7700U / PT-DW7000UPage Contents Precautions with regard to safety Insulate the battery using tape or similar before disposal Use only the Specified batteryDo not place liquid containers on top of the projector Do not insert any foreign objects into the projector Do not look into the lens while the projector is being used AccessoriesDo not use the old lamp unit Precautions on handling Examples of system expansion When the operation mode selector is set to Projector Remote controlName and function of parts When the operation mode selector is set to Computer Front and side of the projector Rear view of the main unit Controls on rear panel Side-mounted connection terminals Video in terminalVideo OUT terminal RGB YPBPR1 input terminal pages 26 Effective range of remote control operation Using the remote control unitLoading dry cells Setting projector ID number to remote control Using a wired remote control Using the remote control as a PC mouseOperation mode selector switch Installation Adjusting the leveling feetInstallation geometry Projection scheme Projection distance SH Effective screen height Installation 11810 ET-D75LE3 Aspect ratio Projection distance L formula Units m Before starting connection Connection· SYNC/Y SDA HD/SYNC SCL Video deck TBC built-in Color monitor Control PC Example of connecting with Video devicesVideo deck TBC built-in High-vision video deck Example of connecting with personal computers Example of connecting with the signal selector Signal selector Installing the input module Installation of input module optionalTypes of the input modules optional Procedure of installation Connecting signals to the input module ET-MD95RGB Connecting the signal to the analog RGB signal input module Connecting the component signalsRGB signal input module optional SUB BNC Connecting the video signals Connecting the signal to the video signal input moduleVideo signal input module optional Connecting the component signals Serial digital input module optional ET-MD95SD2 for 480p/480i/576i Auto Pin No Signal Connecting signals to the DVI signal input moduleDVI-D input module optional How to install the projection lens How to remove the projection lens Powering up the projector Making adjustment and selectionPress the l button. on the main unit or the remote control Roughly adjust the focus of the lens. Refer to Powering off the projector Projection Adjustment range after lens position optical shift How to adjust the lensChoose an item and adjust it using Buttons How to adjust the lens for addressing unevenness of focusing Automatic adjustment Auto Setup Registration of input signal data Renaming the registered signalsRegistration of new data Press the Menu button Clearing the data of registered signals How to erase sub memory How to register into sub memorySub memory Memory no A1 On-screen indicationsRestrictions Using the Shutter function Using the Freeze functionUsing the digital zoom D.ZOOM + function On-screen menus Structure of menu screens Menu items setting Resetting to the factory defaultBasic operations on menu screen Returning to the previous screen Switching the picture mode Adjusting the pictureSelect Picture with the buttons Press the Enter button Adjusting Contrast / Bright / Color / Tint Select Picture with Registering the picture mode settings as presettingsSelect OK with Buttons Press the Enter button Dynamic Iris setting Select the Dynamic Iris setting with Buttons Adjusting the color temperature Operation Adjustment Remarks Procedure of adjustment Adjustment items OperationSharpness / Gamma / Noise reduction To display pictures complying with the sRGB standard Adjusting the position Shift adjustment Size adjustment Clock phase adjustment Select Clock Phase withAdjust the clock phase with Size modes Adjust the Keystone horizontally With the buttons Adjust the vertical Linearity with ButtonsKeystone distortion correction Select Keystone with the buttons Press the Enter button How to use Advanced Menu Signal levelFormat To input Betacam with YCbCr Select Advanced Menu with the buttons Press Enter button Blanking adjustment Select Blanking with the buttons Press the Enter button Adjusting the input resolution Total DOTS, Display DOTS, Total Lines and Display Lines Adjusting the clamp position Select Advanced Menu with the buttons Press the Enter button Specify the area to be adjusted with the buttons Edge blending adjustmentAdjustment marker Edge blending adjustment continuing Select Advanced Menu with the buttons Raster position When 54 pictures are displayed when Sxga signals are input When 43 pictures are displayedChanging the display language Raster position continuing How to change the system format How to use RGB Reality mode Option settings ID number settingProcedure of setting ID number need not be set when only one projector is used Installation Setting FRONT-F FRONT-C REAR-C REAR-F Lamp power Lamp select Press and buttons to select RS232C Setting Position of on-screen indicationsSystem information Press and buttons to select Option These values can be adjusted from 0 to 2 Adjustment Adjusting color matchingSelect Option with the buttons Press Enter button Select Target Data with the buttons Press the Enter button Adjusting the color matching using a colorimeterSelect Measured Data with Buttons Press the Enter button Video setting Automatic adjustmentUsing the buttons, select Auto Setup Press the Enter button Using the buttons, switch to the desired mode Auto signal Output resolution D7700U onlyFan control Use the buttons to select OFF, User 1, User 2, or User Password Setting FUNC1List of P in P How to change the signal for the ET-MD95VM2 optional Using the serial terminals Pin assignments and signal namesCommunication conditions Factory setting Examples of connection Control commands Cable specificationsCommand Connecting to a PC Computer Projector DTE specifications Using the Remote 2 terminal Pin assignments and controlSub 9-pin female External appearance RS-422 control functions Displaying the internal test patternCycle of displayed internal test patterns Setting the password Setting the securitySelect Security with the buttons Press the Enter button Changing the password Setting the textSet the password with the , , and buttons Changing the text How to use CP Option Setting the on-screen indication functionHold down the Menu button for 3 or so seconds Select CP Option with the buttons Setting the system format Example of connection How to use network module optionalName and function of network module parts Initial setting of network module Initial setting of network module continuing Accessing from the Web browserItems Function Description Port No Network setting Top Network setting Advanced control Monitor information Mail settingSmtp Mail setting page continuing Image file control Indication of monitor lamp Lamp Information Checkpoint Remedial measureIndication Monitor Cleaning and replacement of air filter Procedure of cleaningClean the air filter Dismantle the air filter Replacement of lamp unit Timing of lamp unit replacement Procedure of lamp unit replacement 101 On the projector or the remote control Press the Enter button to displayOption screen, and select System Information with Symptoms Checkpoint Power does not turn onRemote control does No image appears on Specifications Length of power supply cord Cabinet Outside dimensionsRemote control Power source Video signal input module Compatible RGB/YPBPR Signals Appendix Outside dimensions Trademark Acknowledgement Concernant LA Sécurité Précautions concernant la sécurité Ne pas couvrir le filtre et la sortie d’airNe pas surcharger la prise de courant Ne pas retirer le couvercle ou le modifier Ne pas placer le projecteur sur des surfaces instables Ne pas placer des récipients de liquide sur le projecteurNe démontez pas le bloc lampe Ne pas mettre d’objets étrangers dans le projecteur ’utiliser que la pile indiquée Ne pas placer d’objets lourds sur le projecteurNutilisez pas un bloc lampe usagé Précautions pour la manipulation Nettoyage et maintenanceMise au rebut Remplacement de la lampe Période de remplacement de la lampe Procédure de remplacement de la lampe La lampe est chaude si elle vient d’être utilisée 115 Technical Support Panasonic Canada Inc