Panasonic PT-DW7000U, PT-D7700U manual Option settings, ID number setting, Procedure of setting

Option settings

ID number setting

The projector has an ID number setting function that helps the user to control two or more projectors either simultaneously or separately with a single remote control. The ID number is set to "ALL" by default. Hence the

ID number need not be set when only one projector is used.

Procedure of setting

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

LANGUAGE

OPTION

TEST PATTERN

SIGNAL LIST

SECURITY

:MENU SELECT

ENTER:SUB MENU

OPTION

PROJECTOR ID	2
SETTING	FRONT-F
LAMP SELECT	DUAL
LAMP POWER	HIGH
RS232C SETTING
OSD POSITION	2
SYSTEM INFORMATION
COLOR MATCHING	OFF
VIDEO SETTING
AUTO SETUP
:MENU SELECT
:CHANGE

Press the “MENU” button.

The MAIN MENU screen will be displayed.

Select “OPTION” with the buttons.

Press the “ENTER” button.

The OPTION screen will be displayed.

Select “PROJECTOR ID” with buttons and change the value with buttons (ALL, 1, 2, …64).

Press the “MENU” button twice.

This concludes the setting procedure and the on- screen indications disappear and the normal screen appears again.

Note • The ID number can be set to “ALL”, or selected from “1” to “64”.

•If the projectors are given ID numbers, their remote controls must be assigned the same ID numbers, respectively.

•If the ID number of a projector is set to “ALL”, it can be controlled by the remote control or the PC with any ID number.

If multiple projectors are used and some of them have their IDs set to “ALL”, they cannot be controlled separately from the projectors with other ID numbers.

For details on remote control ID setting, see page 16.

71